Prime Day Is Here.
Built for Makers. Priced for Prime Day 丨SHOP NOW
product-guides
Gweike MCore Acrylic Cutting Speed Chart (40W–1...
GWEIKE's factory-tested acrylic cutting speed chart for the MCore's 80W CO2 module, from 3mm to 15mm, plus the full 40W–150W comparison table — including a transparent look at what the...
Gweike MCore Acrylic Cutting Speed Chart (40W–1...
GWEIKE's factory-tested acrylic cutting speed chart for the MCore's 80W CO2 module, from 3mm to 15mm, plus the full 40W–150W comparison table — including a transparent look at what the...
Gweike MCore Aluminum & Brass Cutting Settings
Official factory-tested settings for cutting aluminum (1–2mm) and brass (1–1.5mm) on the Gweike MCore with compressed air assist — including why these reflective metals need full power even at their...
Gweike MCore Aluminum & Brass Cutting Settings
Official factory-tested settings for cutting aluminum (1–2mm) and brass (1–1.5mm) on the Gweike MCore with compressed air assist — including why these reflective metals need full power even at their...
Gweike MCore Stainless Steel Cutting Parameters...
Official factory-tested settings for cutting 1–3mm stainless steel on the Gweike MCore with compressed air assist — including speed, power, and nozzle data, plus what you need to know if...
Gweike MCore Stainless Steel Cutting Parameters...
Official factory-tested settings for cutting 1–3mm stainless steel on the Gweike MCore with compressed air assist — including speed, power, and nozzle data, plus what you need to know if...
Gweike MCore Carbon Steel Cutting Parameters: 1...
Official Gweike MCore carbon steel cutting parameters from 1–5mm. Air vs oxygen assist settings, speed, power, focus & nozzle data from factory tests.
Gweike MCore Carbon Steel Cutting Parameters: 1...
Official Gweike MCore carbon steel cutting parameters from 1–5mm. Air vs oxygen assist settings, speed, power, focus & nozzle data from factory tests.
